Sontex Multi Purpose Grout (MPG)
2-18mm Joint Width*
This new improved water resistant wall and floor grout can be used on joint widths from 2–18mm. Suitable for use with porcelain tiles, mosaics, ceramic tiles, marble, natural stone, glass and large format quarry tiles. Its polymer-modified formulation makes it suitable for use indoors and outdoors, with underfloor heating systems and for use on timber floors
- New grit free formulation delivers an outstanding smooth joint finish without scratching the tile on application
- Can be used in wet and dry areas e.g. bathrooms, showers and kitchens
- Available in a range of standard colours, plus any colour to special order
- Formulated to provide improved protection against bacteria, mould, mildew and odours caused by bacterial growth
- Fast setting, walkable after 3 hours
- Complies to BS EN 13888 CG1
- Full range of sealants available in complimentary colours
| Colour | Recommended joint width |
Size |
|---|---|---|
| White* | 1–5mm | 1.5kg, 5kg, 10kg |
| Dark Grey* | 2–10mm | 1.5kg, 5kg, 10kg |
| Ivory | 2–18mm | 5kg, 10kg |
| Light Beige | 2–18mm | 5kg, 10kg |
| Sandstone | 2–18mm | 5kg, 10kg |
| Dark Beige | 2–18mm | 5kg, 10kg |
| Charcoal | 2–18mm | 5kg, 10kg |
| Light Grey | 2–18mm | 5kg, 10kg |
* subject to colour joint limits may vary.
Any colour for joint widths 2–18mm is available as a special order request; subject to minimum order quantities and batch requirements.
Sontex Multi Purpose Grout data sheet
PDF Filesize: 23KB
Sontex Rapid Set Grout (RSG)
2–20mm Joint Width
Sontex Fast Track Grey Grout for flexible and water-impermeable grouting of ceramic wall and floor coverings and polished natural stone slabs, can be used indoors and outdoor. Suitable for residential areas, bathrooms, showers, on balconies, terraces, on facades, and in industrial areas exposed to frequent wetness such as laundries, washrooms, and traffic works, such as underpasses and subway stations. Compatible with heated screeds, dry screeds, pre-cast concrete elements, plaster boards, plaster slabs, chipboards, wooden floors and areas exposed to variations in temperature.
- A new 2 hour rapid setting formulation to provide fast-track results
- Flexible and hard wearing grout for maximum endurance in domestic, commercial and industrial applications
- Colour Mid Grey
- Suitable for use with underfloor heating systems
| Property | Value |
|---|---|
| Colour | Grey |
| Recommended joint widths | 2–20mm |
| Slake time | approx. 3 mins |
| Working time | approx. 25 hour |
| Walkable | approx. 2 hours |
| Waterproof | approx. 2 hours |
| Size | 10 kgs |
| Coverage | 10 kg sufficient for approx 20m2 (depending on tile size & joint dimension) |
Sontex Rapid Set Grout data sheet
PDF Filesize: 30KB